Afaq Shamel (103) as Access Point

..here is how i configure afaq shamel 103.

1.Open modem address, 192.168.1.1 and enter username: admin, password: admin. Click enter

2. Go to Advanced Setting and hit OK.

3. Click WAN Service, remove all profile. Check all and click remove button.

..once all removed. click add button and click next.

4.Select bridging for WAN service type and click next.

5. Click Apply/Save.

6. Go to LAN and set up the ip address and disable the dhcp server. see pic below.

Note: assuming the main modem ip is 192.168.100.x. if the main modem ip is 192.168.1.x, change only the last octet(x) for the settings of LAN. Be sure to remember the IP Address for this will use if you change the wifi name and password in the future.

7. Go to Management, click reboot and click reboot button.

and that's it, you can now have Access Point using Afaq Shamel 103 model.

Note: be sure to test your configuration using a pre-made(1meter) lan cable to your main modem. For your Wifi name and Wifi password, you can open wireless settings to change the values.